Komatsu — LUBRICATE DRIVE SHAFT

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE REMARK If special drive shaft grease is used continuously, carry out Special drive shaft grease: 56B-20-19910 1. Using a grease pump, pump in grease through the grease 4 - 38 (4) Body hinge pin ( (5) Hitch bearin g (1 LUBRICATE DRIVE SHAFT grease, or after changing to t greasing every 250 hours. When u sing lithium-based changing lithium-based g reas e, carry ou t greasing every 250 hours. Special d rive s haft g rease is u sed when the machine is s hipped from the f actor y, so it is unnecessar y to c arry out greasing for the first 6000 hours or 2 years. greasing every 6000 hours or every fitting s marked b y the a 2.

Grea se the spid er portion u ntil g rease comes out from the cap seal. 3. After greasing, w ipe off an y old greas e that was pushed o ut.