. ATTACHMENTS, OPTIONS HANDLING TACHOGRAPH (TCO20-90W) CLOCK SCALE This scale (5) is the scale for the clock. CLOCK NEEDLE These needles (6) point to the time. MODEL DISPLAY LABEL The model of the tachograph is input on label (7). 6 - 3 KEYHOLE This keyhole (1) is use d when opening and closing the cover to replac e the chart paper. SPEED SCALE This scale (2) is the sc ale for the machine speedom SPEED INDICATOR This indicator (3) show s the machine travel speed. ODOMETER This meter (4) shows th e total distance that the mac hine has tra veled (k m). (The distance traveled in reverse is also added.) nit is 0.1 km.
The minimum display u OPERATOR SHIFT CHA NGE KNOB Knob (8) can be used t o give independent data for 3 operator Align the scale on the knob with the setting scale (1 , 2, 3). SPEED RECORDING IN DICATOR Item (9) records the m omentary speed of the mach ine on the chart pap OPERATOR SHIFT CHANGE RECORDING INDICATO R This needle (10) record s the data by filling in three types of wi dth on th e chart paper according to the operation of the operator shift chan ge knob. SPARE RECORDING IN DICATOR This needle (11) record s the desired data (for exam ple: amou nt loaded , amoun t unloaded) according to the switch (separately purchased) installed on the outside.
ODOMETER RECORDIN G INDICATOR This needle (12) record s the distance traveled by t he machine on the c hart paper. One mark i ndicates 10 km. SPEED WARNING SETUP ADJUSTMENT SCREW This screw (13) can be used to set the speed for lig hting up th e speed warning lamp Use a flat-headed scre wdriver to turn and make the setting. Setting range: 40 to 90 km/h (24.9 to 55.9 MPH) SPEED WARNING SETUP CONFIRMATION WINDOW Window (14) is used to confirm the speed sensor w hen turnin g the spe ed warning setting adjustment screw.