Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS DUMP LEVER CAUTION To prevent damage to the dump body through vibration from the road surface, always lower the dump body before traveling. RETARDER CONTROL LEVER WARNING The retarder must not be used as a parking brake. 3 - 43 Activating the shift hold fun ction will restrict the automatic shifting of the transmission to gear speeds below the gearshift lever gear shifting. The shift hold function can b e canceled by [1] moving the gearshift lever or [2] activating the sh ift hold switch located on the gearshift lever.

The shift hold pilot lamp loc ated on the machine instrument p anel will indicated the status of t he shift hold function. or down a range, pre-select the Before starting either up transmission gear and main tain a machine travel speed whic h will give you full control under a ll the anticipated conditions. This lever (4) is used to ope rate the dump body. stops and is held in position. (a) RAISE (b) HOLD: The dump body (c) FLOAT: The dump body moves freely under external forc (d) LOWER osition when traveling. Always set to the FLOAT p It is impossible to travel in r everse if the dump body is raised .

If the engine stops during t he dump operation, the dump bod y is held in position, regardless of the position of the dump lever. Even when th e engine starts again, the dump b ody is held in positi on. For details of the met canceling the hold function , see "CANCELING DUMP BOD Y HOLD CONDITIO Use this lever (5) to operate the retarder when traveling downhill. The more the lever is p becomes. When the retarder is opera up. ulled, the greater the braking force ted, the retarder operation lamp lights orce When leaving the operator' s seat, always apply the parking b rake