. OPERATION EXPLANATION OF COMPONENTS SAFETY PIN WARNING ARTICULATE LOCK WARNING 3 - 46 When carrying out insp ection of the machin e with the dum p bod y raised, always set the dump lever to the HOLD position, lock with the safety lock kno b, then use the safet y pin. This is a safety dev ice for the dump body, and i s use d when carrying out inspectio n or maintenance with th e dump bod y raised. Raise the dump bod y fully, insert safety pins ( 1). Always i nsert the safety pins on both s ides. STOWING SAFETY P The safety pins are s tored at the bottom rear of the dump body.
Insert safety pins (1) , then insert lock pi ns (2) to sto w in p If the machine is trans ported or raised without ap plying t he articulation l ock, the machine may sudde nly articulate. This may cause serious injury to persons in the surrounding area. When transporting o r raising the machine , alwa ys apply the a rticulation Apply the articulatio n lock if necessary w hen ca rrying o ut maintenance The articulation lock is a device to lock the f ront frame and rear g. hen transporting or ear frame to prevent the LOCK position: Alwa machine from articulatin ys set to this position w raisi Set ng the machine. to the LOCK position if necessary when ing out maintenance.
ys set to this position when traveling carry FREE position: Alwa ing out maintenance. ys set to this position wh