SERVICE ENGINE Service Engine Engine Warranty Maintenance Statement The following John Deere oils are preferred: API Service Classification SG or higher Engine Oil Use oil viscosity based on the expected air temperature range during the period between oil changes. Checking Engine Oil Level IMPORTANT: Avoid damage! Failure to check the oil level regularly could lead to serious engine problems if oil level is low: Check oil level before operating. Check oil level when the engine is cold and not running. Keep level between the FULL and the ADD marks. Shut off engine before adding oil. NOTE: Check oil twice a day if you run engine over 4 hours in a day.
Make sure engine is cold when checking engine oil level. 1. Park machine safely. (See Parking Safely in the SAFETY section.) 2. Lift hood. 3. Clean area around dipstick to prevent debris from falling into crankcase. Service Engine - 32 Maintenance, repair, or replacement of the emission contr devices and systems on this engine, which are being don at the customers expense, may be performed by any non road engine repair establishment or individual. Warranty repairs must be performed by an authorized John Deere dealer. Avoid Fumes ol e - s MX4888 c CAUTION: Avoid injury! Engine exhaust fumes contain carbon monoxide and can cause serious illness or death.
Move the vehicle to an outside area before running the engine. Do not run an engine in an enclosed area without adequate ventilation. • Connect a pipe extension to the engine exhaust pipe to direct the exhaust fumes out of the area. • Allow fresh outside air into the work area to clear the exhaust fumes out. s • TURF-GARD® • PLUS-4® Other oils may be used if above John Deere oils are not available, provided they meet the following specification: