Kubota — SERVICING

03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE [2] DISASSEMBLING AND ASSEMBLING (1) Draining Oil and Coolant Draining Engine Oil 1. Start and warm up the engine for approx. 5 minutes. 2. Place an oil pan underneath the engine. 3. Remove the drain plug (1) to drain oil. 4. After draining, screw in the drain plug. (When refilling) Fill the engine oil up to the upper line on the dipstick (2). IMPORTANT Q Never mix two different types of oil. Use the proper SAE Engine Oil according to ambient temperature. (1) Drain Plug (2) Dipstick W1028998 Draining Coolant CAUTION Never remove radiator cap while operating or immediately after stopping. Otherwise, hot water will spout out from the radiator.

Wait for more than ten minutes to cool the radiator, before opening the cap. 1. Prepare a bucket. Open the coolant drain cock. (1) Coolant Drain Cock W1029172 (2) External Components Air Cleaner, Muffler and Others 1. Remove the air cleaner and muffler. 2. Remove the fan (1), fan belt (4), alternator (2) and starter (3). (When reassembling) Check to see that there are no cracks on the belt surface. IMPORTANT Q After reassembling the fan belt, be sure to adjust the fan belt tension. Do not confuse the direction of the fan. (1) Fan (2) Alternator (3) Starter (4) Fan Belt W1060302 S-46 KiSC issued 07, 2008 A