03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE Valves 1. Remove the valve caps (3). 2. Remove the valve spring collet (4), pushing the valve spring retainer (5) by valve spring replacer (1). 3. Remove the valve spring retainer (5), valve spring (6) and valve stem seal (2). 4. Remove the valve (7). (When reassembling) Wash the valve stem and valve guide hole, and apply engine oil sufficiently. After installing the valve spring collets (4), lightly tap the stem to assure proper fit with a plastic hammer. IMPORTANT Q Do not change the combination of valve and valve guide.
(1) Valve Spring Replacer (2) Valve Stem Seal (3) Valve Cap (4) Valve Spring Collet (5) Valve Spring Retainer (6) Valve Spring (7) Valve W1022102 Thermostat Assembly 1. Remove the thermostat cover mounting screws, and remove the thermostat cover (1). 2. Remove the thermostat assembly (3). (When reassembling) Replace the thermostat cover gasket (2) with new one. Apply a liquid gasket (Three Bond 1215 or equivalent) to the water flange 1 (4) and flange 2 (5) (1) Thermostat Cover (2) Thermostat Cover Gasket (3) Thermostat Assembly (4) Water Flange 1 (5) Water Flange 2 W1105115 Water Pump Assembly (If necessary) 1. Remove the water pump assembly (1) from the gear case.
(When reassembling) Replace the gasket (2) with new one. (1) Water Pump Assembly (2) Gasket W1051957 S-53 KiSC issued 07, 2008 A