Kubota — SERVICING

03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE Fuel Camshaft and Fork Lever Assembly 1. Remove the fuel feed pump. 2. Detach the fuel camshaft stopper (1). 3. Remove the three fork lever holder mounting screws (2). 4. Draw out the fuel camshaft assembly (5), (6) and fork lever assembly (3), (4), (7) at the same time. (When reassembling) After installation, check to see that the fork lever 1 (3) and lever 2 (4) are fixed to the fork lever shaft, and that they can turn smoothly in the holder (7). (1) Fuel Camshaft Stopper (2) Fork Lever Holder Mounting Screws (3) Fork Lever 1 (4) Fork Lever 2 (5) Injection Pump Gear (6) Fuel Camshaft (7) Fork Lever Holder W1025309 Oil Pump 1.

Remove the nut. 2. Draw out the oil pump drive gear (2) with gear puller (1). 3. Remove the four oil pump mounting screws. Detach the oil pump (3). (1) Gear Puller (2) Oil Pump Drive Gear (3) Oil Pump W1025581 Crank Gear 1. Draw out the crank gear (2) with a puller (1). 2. Remove the feather key. (1) Crank Puller (2) Crank Gear W1025476 S-62 KiSC issued 07, 2008 A