03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE Valve Recessing 1. Clean the cylinder head surface, valve face and valve seat. 2. Insert the valve into the valve guide. 3. Measure the valve recessing with a depth gauge. 4. If the measurement exceeds the allowable limit, replace the valve. 5. If it still exceeds the allowable limit after replacing the valve, replace the cylinder head. (1) Cylinder Head Surface (A) Recessing (B) Protrusion W10768800 S-75 KiSC issued 07, 2008 A Valve recessing Factory spec.
D1503-M D1703-M D1803-M V2003-M V2203-M V2403-M V2403-M-T D1703-M-BG V2003-M-BG V2003-M-T-BG V2203-M-BG V2403-M-BG 0.05 (protrusion) to 0.15 (recessing) mm 0.002 (protrusion) to 0.0059 (recessing) in. D1803-M-DI V2403-M-DI V2403-M-DI-T 0.65 to 0.85 mm 0.026 to 0.033 in. Allowable limit D1503-M D1703-M D1803-M V2003-M V2203-M V2403-M V2403-M-T D1703-M-BG V2003-M-BG V2003-M-T-BG V2203-M-BG V2403-M-BG 0.40 (recessing) mm 0.016 (recessing) in. D1803-M-DI V2403-M-DI V2403-M-DI-T –