Kubota — SERVICING

03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE Cam Height (Continued) 1. Measure the height of the cam at its highest point with an outside micrometer. 2. If the measurement is less than the allowable limit, replace the camshaft. W1111109 Oil Clearance of Camshaft Journal 1. Measure the camshaft journal O.D. with an outside micrometer. 2. Measure the cylinder block bore I.D. for camshaft with a cylinder gauge, and calculate the oil clearance. 3. If the oil clearance exceeds the allowable limit, replace the camshaft. W1031662 S-84 KiSC issued 07, 2008 A Cam height of exhaust Factory spec. V2403-M-DI-T 33.00 mm 1.299 in. V2403-M-T D1703-M-BG V2003-M-BG V2203-M-BG 33.27 mm 1.310 in.

D1503-M V2003-M V2003-M-T-BG 33.47 mm 1.318 in. D1703-M D1803-M V2203-M V2403-M D1803-M-DI V2403-M-DI V2403-M-BG 33.90 mm 1.335 in. Allowable limit V2403-M-DI-T 32.95 mm 1.297 in. V2403-M-T D1703-M-BG V2003-M-BG V2203-M-BG 33.22 mm 1.308 in. D1503-M V2003-M V2003-M-T-BG 33.42 mm 1.316 in. D1703-M D1803-M V2203-M V2403-M D1803-M-DI V2403-M-DI V2403-M-BG 33.85 mm 1.333 in. Oil clearance of camshaft journal Factory spec. 0.050 to 0.091 mm 0.0020 to 0.0035 in. Allowable limit 0.15 mm 0.0059 in. Camshaft journal O.D. Factory spec. 39.934 to 39.950 mm 1.5722 to 1.5728 in. Cylinder block bore I.D. Factory spec. 40.000 to 40.025 mm 1.5748 to 1.5757 in.