03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM G GENERAL [2] CHECK POINTS OF INITIAL 50 HOURS Changing Engine Oil CAUTION Be sure to stop engine before changing engine oil. 1. Start and warm up the engine for approx. 5 minutes. 2. Place an oil pan underneath the engine. 3. To drain the used oil, remove the drain plug (1) at the bottom of the engine and drain the oil completely. 4. Screw the drain plug (1). 5. Fill new oil up to upper line on the dipstick (2). IMPORTANT Q When using an oil of different maker or viscosity from the previous one, remove all of the old oil. Never mix two different types of oil. Engine oil should have properties of API classification CF (See page G-7).
Use the proper SAE Engine Oil according to ambient temperature. *90 mm (3.5 in.) oil pan depth is optional. (1) Drain Plug (2) Dipstick W1016604 G-10 KiSC issued 07, 2008 A Above 25 °C (77 °F) SAE 30 or SAE 10W-30 SAE 10W-40 0 °C to 25 °C (32 °F to 77 °F) SAE 20 or SAE 10W-30 SAE 10W-40 Below 0 °C (32 °F) SAE 10W or SAE 10W-30 SAE 10W-40 Models Oil pan depth 124 mm (4.88 in.) *90 mm (3.5 in.) D1503-M, D1703-M D1803-M, D1803-M-DI D1703-M-BG 7.0 L 1.8 U.S.gals 5.6 L 1.5 U.S.gals V2003-M, V2203-M V2403-M, V2403-M-DI, V2403-M-DI-T V2003-M-BG, V2003-M-T-BG V2203-M-BG, V2403-M-BG 9.5 L 2.5 U.S.gals 7.6 L 2.0 U.S.gals V2403-M-T 9.5 L 2.5 U.S.gals –