. OPERATION OPERATION WARNING Emergency stop NORMAL OPERATION NOTICE 3 - 105 or any other trouble occurs, turn the key i n the starting switch to the OFF position. If the work equipment is op erated without warming up the machine s ufficiently, th e response o f the work equipment t o the er will be slow. The work equipment may not move as the operator desires. Follow all warm-up cold areas, make sure to warm up the mac hine properly After starting the engine, do not immediately start operations. Fir st, perform t he following operations and checks.
Do not accelerate the engine su ddenly until the warming-up operation ha Do not run the engine at low idl e or high idle continuously for more than 20 minutes. If it is necessary to continue to run the engine at idle, apply a load from t ime to time o r run the engi ne at a mid-range spee 1. Always wait for the wa rming-up operation to be complete (until the engine idling s low idling speed of 800 2. After completing the w peed is reduced from 1100 rpm to th rpm). arming-up operation, check that th gauges and caution lam If any problem is found, Run the engine under lo gauge (1) enters the gre ps work properly. carry out maintenance or repair. w load until engine water temperatur en range.
haust gas color, noise, or vibration. I ontact your Komatsu distributor. 3. Check for abnormal ex any problem is found, c