. OPERATION LONG-TERM STORAGE LONG-TERM STORAGE DURING STORAGE WARNING AFTER STORAGE 3 - 176 BEFORE STORAGE e (more than one month), store as follows. ried, house the machine in a dry building. Never leave it outdoors. When keeping in long-term storag After every part is washed and d ried, house the machine in a dry building. Never lea In case it is indispensable to lea ve it outdoors, park the machine on the flat ground a nd cover i t with c anvas etc. Completely fill the fuel tank. Thi s prevents moisture from collecting. ore storage. hydraulic cylinder piston rod with grease. witch to the OFF position. parking) position.
Lubricate and change the oil bef Coat the exposed portion of the Turn the battery disconnector s Place gear shift levers at the P ( Fit a block under the center of th e front wheel and the tandem case, jack up the tire s from the ground , then put a block under the blade and low er it on top of the block. ing stopper to prevent the front tires from falling down. Lock the front axle with the lean ing stopper to prevent the front tires from falling dow To prevent rust, fill with Komatsu genuine supercoolant (AF-NAC) to give a density of at least 3 0% for t he engine coolant.
If it is necessary to perform the rust-pre vention operation while the machine is indoors, open the doors and windows to improve ventilation and prevent gas poisoning. During storage, operate and mov e the machine for a short distance once a month so t hat a new film of o il will coat moving parts. At the same time , also charge the battery. ment, wipe off all the grease from the hydraulic cylinder rods. When operating the work equip ment, wipe off all the grease from the hydraulic cylin If the machine is equipped with an air conditioner, operate the air conditioner for 3 to 5 minute s once a mont h to lubricateall parts of the air condit check the refrigerant level twice ionercompressor.
Always run the engine at low idle w hen doin g this. I n addition, a year. NOTICE If the machine has been stored withou t carrying out the monthly rust-prevention operation, con sult your Komatsu distributor before using it. When using the machine after long -term storage, do as follows before using it. draulic cylinder rods. Wipe off the grease from the hy Add oil and grease to all places. When the machine is stored for a long period, moisture in the air will mix with the oil. C heck the o il before and a fter starting the engine. If there is w ater in the oil, change all the oil.