Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 4 - 35 NOTICE When cleaning th e fins, be caref ul not to bring n ozzle (7 ) into contac with f ins (8). When fins, cleaning th oil cooler fin e fins, direct n s, aftercooler fi ozzle (7) a ns, and co t right angles ndenser fins. When using steam spray nozzle ( 7), fins (8) will be damage is to o c lose stance cleaning Use t he following conditions as a guidelin e when cleanin Spray pressure (A ): Max. 0.20 MP a {2.0 kg/ cm2, 2 8.4 PSI} Distance between nozzle and fin (B): Min. 100 mm (3.9 in 5. Check the rubb er hose. Rep lace with a new one if the hose is f ound to have cracks or to be hardened by a geing.

Further, c heck hose clamps for looseness 6. Install panels ( 4) and (2), th en tighte n the bolts (3 ) and (1) to the specified tightening to rque.