. FOREWORD BEFORE READING THIS MANUAL BEFORE READING THIS MANUAL rules for the operation and maintenance of machines. Read, understand and follow all precautions and warnings in this manual and on the machine before performing operation and maintenance. Failure to do so may result in serious injury or death. Komatsu cannot predict the machine is used. Always keep this it at any time. Storage location for the Operation and Maintenance Manual: Pocket at rear of operator's seat If this manual is lost or replacement. For details the past are given in ( ). The explanations, on the latest information available as of the machine may lead to (For example: 1 (1)) been shipped.
If this safety devices and specifications that are whether your product complies with the applicable standards and regulations of your country, consult Komatsu or your Komatsu distributor before operating the machine. 1 - 2 ails of the operation and methods of inspection and maintenance fo se the machine safely. Most accid ents are caused by the failure to f ct every circumstance that migh t involve a potential hazard whe essages in this manual and on th e machine may not include all pos eration, inspection, or maintenan ce under conditions that are not d ur responsibility to take the nece ssary precautions to ensure safet e prohibited uses or actions desc ribed in this manual.
Improper op hazardous and could result in se rious injury or death. , be sure to give this manual to th e new owner together with the m eration and Maintenance Manu right so that all relevant personne r damaged, contact your distribut or immediately to arrange for its serial No. you will need to provide your Komatsu distributor, see "TA OR (PAGE 1-7)". nternational units (SI) for units of measurement. For reference, unit ). ues, and illustrations in this man ual have been prepared based te of its publication. Continuing i mprovements in the design of th t are not reflected in this manual.
Consult Komatsu or your Komats oncerning your machine or with q uestions regarding information c les in the illustrations correspond hines that comply with all applica ble regulations and standards of th machine has been purchased in another country, it may lack ce necessary for use in your coun