Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CLEAN TRANSMISSION BREATHER CHANGE OIL IN FINAL DRIVE CASE WARNING Tightening torque: 58.8 to 78.4 Nm (6 to 8 kgm , 43.4 to 57.9 lbft) 4 - 64 1. Stop the engine a nd wait for the temper ature at all p arts t o go down. 2. Remove all mud a nd dirt from around th 3. Remove the breat her and fit a cover to the breather mounting hole to prevent dir 4. Soak the breather in flushing liquid and wash it. 5. Install the breathe The parts and oil are at hi gh temperature immedia tely after the e ngine is stopped, and may cause burns . Wait for the temperature to g o down before startin g the work. Refill capacity: 17 li ters (4.49 US gal) (wi th differentia l lock) 1.

Set a container un der the final drive cas e to catch th e oil. 2. To prevent gettin g oil on yourself, loosen drain plug (P) and and 3. drain the oil. To prevent the oil f gradually remove After draining the rom spurting out, loosen drain plug (P), then it. oil, install drain plug (P). 4. Pour in the specifi ed amount of engine oil from oil fil ler (F) . 5. 6. After refilling, che details, see "CHE ADD OIL (PAGE Check for oil leak ck that the oil is at the specified level. For CK OIL LEVEL IN FINAL DRIVE CASE, 4-49)". age from the final drive case.