MAN — Removing and installing intake manifold

Removing and installing intake manifold D Drain coolant, see page 39 D Remove intercooler, see page 79 Note: When carrying out work on the intake sys- tem, ensure meticulous cleanliness to pre- vent dirt and foreign matter from penetrat- ing into the system. Removing intake manifold Fig. 1 1 Remove hose connection from LDA. Fig. 2 Remove the mounting bolts from the intake pipe (13 mm). 2 Fig. 3 Take off intake pipe. 3 Installing intake manifold Fig. 4 Place intake manifold with new seals in position. Tighten mounting bolts to the specified torque. Ensure that the seals are correctly seated. 4 69