MAN Nutzfahrzeuge Aktiengesellschaft — Removing, installing and changing piston rings

Removing, installing and changing piston rings Piston ring arrangement Fig. 1 1 Compression ring (double-sided keystone ring) 2 Compression ring (tapered compression ring) 3 Oil scraper ring (bevelled-edge ring) 1 2 3 Removing piston rings 1 Fig. 2 Remove piston with connecting rod. Clamp connecting rod in a vice using soft jaws. Adjust piston ring pliers to piston diameter. 2 Fig. 3 Apply piston ring pliers at piston ring gap and unclip piston rings from piston ring grooves. Note: Owing to the hose-type spring the oil scraper ring has a higher tangential ten- sion. Carefully clean the piston ring grooves using a piece of wood. Do not damage the piston ring grooves. 3 Checking ring gap Fig.

4 Insert piston rings singly into the cylinder and as- certain the ring gap using a feeler gauge. Replace piston rings if the ring gap is too large. For ring gap see “Service Data”. 4 122