Replacing cylinder liners Fig. 9 Apply thin coat of engine oil to cylinder liner in the area of the upper and lower O-ring. Apply thin coat of engine oil to lower O-rings in the crankcase. Insert cylinder liners into crankcase and push them down by hand. Place clean metal plate on liner and exert uniform downward pressure until the liner is seated in the crankcase recess. If a perceptible resistance can be felt in this opera- tion, the O-rings are no longer in their proper place. Reposition O-rings and insert cylinder liner again. 9 Note: No grease or sealing agents of any kind must be used for installing cylinder liners and O-rings. 126