MAN Nutzfahrzeuge Aktiengesellschaft — Crankshaft

144 Service Data Dimensions Limit values Crankshaft rear end (adjacent to flywheel) 1 Max. permissible runout with crankshaft taken up in end bearings: at bearing 4: 0,08 mm standard size: 38,000−38,062 mm (Ø 38 H9) Undersize -0,25 and -0,50: 38,500−38,562 mm (Ø 38,50 H9) Undersize -0,75 and -1,00: 39,000−39,062 mm (Ø 39 H9) 1 = Colour marking for size identification of thrust bearing journal length Undersize −0,25: red Undersize −0,50: white Undersize −0,75: yellow Undersize −1,00: lilac Main bearing Data for wall thickness and bearing inner diameter also apply to the align- ment bearing standard size: 3,455 − 3,467 mm Undersize −0,25: 3,580−3,592 mm Undersize −0,50:

3,705−3,717 mm Undersize −0,75: 3,830−3,842 mm Undersize −1,00: 3,955−3,967 mm Bearing bore in installed condition: standard size: 104,066−04,112 mm Undersize −0,25: 103,816−03,862 mm Undersize −0,50: 103,566−103,612 mm Undersize −0,75: 103,316−103,362 mm Undersize −1,00: 103,066−103,112 mm Spread:0,3 − 1,2 mm Marking: top / bottom standard size: 0958 / 0079 undersize −0,25: 0962 / 0081 undersize −0,50: 0964 / 0082 undersize −0,75: 0966 / 0083 undersize −1,00: 0968 / 0084