MAN Nutzfahrzeuge Aktiengesellschaft — Conrod bolts

148 Service Data Dimensions Limit values Conrods Ø A 0.02 Ø A 1 8 mm 8 mm 2 a b 3 46,055−46,065 mm Wear limit: 46,09 mm Bearing bore in directions 1,2 and 3 and in planes a and b: 90,064−90,106 mm Pre-conditions: new big-end bearing in place, conrod assembled Conrod bearings Standard size: 2,463−2,473 mm Undersize -0,25: 2,588−2,598 mm Undersize -0,50: 2,713−2,723 mm Undersize -0,75: 2,838−2,848 mm Undersize -1,00: 2,963−2,973 mm Spread: 0,6−1,5 mm If signs of wear are present (scores,antiwaer coating damaged), change both bearing shells Important: Observe installation position (rod shell has red or yellow colour mar- kings on the side) Conrod bolts Length:

With each tightening, the bolts are deliberately stressed beyond the stretch limit and each tightening thus ex- tends their length permanently. When the max. length has been reached, the bolt may no longer be used. 68,2−68,5 mm, max. 69,5 mm