MAN Nutzfahrzeuge Aktiengesellschaft — Removing and installing fuel injectors

Removing and installing fuel injectors Removing fuel injectors Fig. 1 Remove the injection lines from the injection nozzles and from the injection pump. Remove the fuel return lines. 1 Fig. 2 After removal of the injection lines we recommend fitting caps to the connections on the injection nozzles and injection pump. This prevents dirt from getting into the injection system. Caution: Dirt in the injection system causes: D nozzles to jam D the injection-pump drive gear to break 2 Fig. 3 Remove pressure screw from fuel injector using a pin spanner. 3 Fig. 5 Screw adapter on to nozzle holder. Screw on inertia extractor and knock out nozzle holder. Take sealing ring off the injection nozzle.

Check and repair injector, see page 39. 4 37