Fuel prefilter Cleaning fuel prefilter Fig. 1 Disassemble fuel prefilter: D Remove filter housing (arrow) 1 Fig. 2 D Wash out filter housing А and gauze filter Б in clean Diesel fuel and blow them out with com- pressed air D Reassemble using new seal D Screw on filter housing and tighten it to 10−12 Nm 1 2 2 Fig. 3 D Actuate plunger of hand priming pump until the overflow valve of the injection pump opens audibly D Screw in and tighten plunger on hand pump D Start engine D Check fuel prefilter for leaks 3 42