MAN Nutzfahrzeuge Aktiengesellschaft — Removing and installing cylinder head

Removing and installing cylinder head Removing the rocker arms and push rods Fig. 1 Take off the cylinder head covers. Caution: Residual amounts of oil may emerge du- ring this operation. Used oil is dangerous waste. Observe safety regulations to prevent da- mage to the environment. 1 Fig. 2 Back off valve adjusting screws. Loosen mounting bolts of rocker arm bracket. Remove rocker arm bracket. Disassembling and assembling rocker arms, see page 96. Removing cylinder head D Drain coolant, see page 46 D Remove injectors, see page 37 D Removing intake manifold, see page 80 D Removing exhaust manifold, see page 81 2 Note:

To remove a cylinder head, it is not ne- cessary to detach the intake and exhaust pipes. Fig. 3 Take out push rods. 3 Fig. 4 Remove cylinder head bolts in reverse order of tightening (For torque tightening diagram see “Ser- vice Data”). 4 91