c. When checking coolant in radiator, relieve pressure before removing radiator cap. Do not stand in front of rim and locking ring when inflating tire. d. Check tires for cuts, damage or ‘‘bubbles’’. Check tires for proper inflation. If tire is warm from operation, allow tire to cool before adjusting tire pres- sure . If inflation is needed, use an air chuck with extension hose clipped on the tire inflation valve to allow service from behind the tread of the tire and away from front of wheel. e. Clean ladder and handrails of any foreign material such as ice, snow, mud or oil. f.
Upon completion of an exterior inspection of the truck, clean mud, grease, or snow from shoes before climbing access ladder. Preparing For Operation Always mount and dismount facing the truck. Never attempt to mount or dismount the truck while it is in motion. 5. Always use handrails and ladder when mounting or dismounting from the truck. 6. Check the deck areas for debris, loose hardware or tools. 7. Become familiar with all protective equipment devices on the truck and insure that these items (anti-skid material, grab bars, seat belts, etc.) are securely in place. 8. Read and understand the contents of this handbook.
Read the sections pertaining to safety and operating instructions with special attention. Become thoroughly acquainted with all gauges, instruments and controls before at- tempting operation of the truck. Read and understand WARNING and CAUTION decals in the operator’s cab. 9. Keep all unauthorized reading material out of truck cab. 10. Do not carry tools and supplies or allow trash to accumulate in cab of truck. HB2-2 General Safety Rules HB2002 4/94