Maintenance Section Inspect for Intake Leaks (LP Engine Only) Replace Oxygen Sensor (G643E Engine Only) 1. Visually inspect the intake manifold, throttle assembly (4), and manifold adapters (3), for looseness and leaks. Repair as necessary. Replace PCV Valve and breather element - Change (LP Engine Only) 1. Loosen the hose clamps and remove the PCV valve. Muffler Ass’y When indicated by MIL, replace oxygen sensors on the exhaust tube and muffler assembly. 1. Stop engine and wait until the exhaust pipe and exhaust pipe is cooled. 2. Disconnect the electrical connector of oxygen sensor. 3. Remove oxygen sensor. 4. Assemble new oxygen sensor Tightening torque : 45 N•m (32.5 lb•ft) 5.
Connect the electrical connector of oxygen sensor. Exhaust Tube 2. Assemble new PCV valve and hose. 3. Tighten the hose clamps 186