IN CASE OF EMERGENCY 173 7. Lower the vehicle by turning the jack screw to the left Ъ page 227. V EHICLES W ITH A LLOY W HEELS 2. The plastic fin must be directed downwards and perfectly coincide with the flange cut part; fit the bracket in the adapter, fold the bracket up and secure it to the adapter with the fastening knob. 8. Lower the jack to its fully-closed position. For stowing a damaged tire on vehicles with alloy wheels, remove the adapter bracket and bolts from the storage bag in the glove compartment and follow the steps below: WARNING! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle.
Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately. 1. Take the adapter and fit the plastic spacer between the spring and the flange of the bracket (The adapter bracket is sold separately through the dealer). 9. Stow the cable and wheel spacer before driving the vehicle Ъ page 173. 10. Stow the jack and tools under the driver’s seat. 11. Check the spare tire pressure as soon as possible. Correct the tire pressure, as required. Adapter/Bracket 1 — Adapter 2 — Fastening Knob 7 12.
When you place the spare tire back on the winch or if you carry the tire in need of repair on the winch, always check that the tire is properly secured under the vehicle by pushing on the stowed tire under the rear fascia/ bumper at the back of the vehicle. If the tire has motion when pushed, use the tools to re-tighten the winch until a loud click is heard. Adapter/Spacer 1 — Adapter 2 — Plastic Spacer