SERVICING AND MAINTENANCE 199 F USES General Information WARNING! When replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material. Do not place a fuse inside a circuit breaker cavity or vice versa. Failure to use proper fuses may result in serious personal injury, fire and/or property damage. Upfitter Connector This connector is supplied to the upfitter when the vehicle is ordered with the applicable package.
2 Way Vehicle Connector Functions and View Before replacing a fuse, make sure that the ignition is off and that all the other services are switched off and/or disengaged. This connector is supplied to the upfitter when the vehicle is ordered with the applicable package. Upfitter Connector If the replaced fuse blows again, contact an authorized dealer. CAUTION! If a general protection fuse for safety systems (air bag system, braking system), power unit systems, (engine system, transmission system) steering system or Body Control Module (BCM) blows, contact an authorized dealer. 8 The maximum current load allowed is 15 amps for continuous use.
For additional questions about these connectors as well as general technical questions about upfitting your Ram product, refer to https:// www.ramtrucks.com/ram-commercial/ body-builders-guide.html/ or call 1 (866)-205-4102. Connector Pins PIN Function A Power Supply B GND