RAM ProMaster City — Closing

GETTING TO KNOW YOUR VEHICLE 37 HOOD O PENING To open the hood, two latches must be released. 1. Pull the release lever located below the instrument panel and in front of the driver's door. 2 Hood Safety Latch Lever Location Hood Prop Rod 3. Raise the hood and place the hood prop rod in hood slot to secure the hood in the open position. C LOSING WARNING! Be sure to disengage the rod and secure it in closed position before closing the hood. Damage may occur. CAUTION! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision.

Failure to follow this warning could result in serious injury or death. Hood Release Lever 2. Move to the outside of the vehicle, reach into the opening beneath the center of the hood and push up the safety latch lever to release it, before raising the hood. CAUTION! To prevent possible damage, do not slam the hood to close it. Lower hood to approximately 12 inches (30 cm) and drop the hood to close. Make sure hood is fully closed for both latches. Never drive vehicle unless hood is fully closed, with both latches engaged.