70 STARTING AND OPERATING Trailer Sway Control (TSC) Weight-Distributing Hitch WARNING! The TSC can be a mechanical telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. The weight-distributing hitch works by applying leverage through spring (load) bars. They are typically used for heavier loads to distribute trailer tongue weight to the tow vehicle's front axle and the trailer axle(s).
When used in accordance with the manufacturer's directions, it provides for a more level ride, offering more consistent steering and brake control thereby enhancing towing safety. The addition of a friction/hydraulic sway control also dampens sway caused by traffic and crosswinds and contributes positively to tow vehicle and trailer stability. Trailer Sway Control (TSC) and a weight distributing (load equalizing) hitch are recommended for heavier Tongue Weights (TW) and may be required depending on vehicle and trailer configuration/loading to comply with Gross Axle Weight Rating (GAWR) requirements.
An improperly adjusted Weight Distributing Hitch system may reduce handling, stability, braking performance, and could result in a collision. Weight Distributing Systems may not be compatible with Surge Brake Couplers. Consult with your hitch and trailer manufac- turer or a reputable Recreational Vehicle dealer for additional information. If equipped, the electronic TSC recognizes a swaying trailer and automatically applies individual wheel brakes and/or reduces engine power to attempt to eliminate the trailer sway.
Weight-Carrying Hitch T RAILER H ITCH C LASSIFICATION A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are commonly used to tow small and medium sized trailers. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.
Trailer Hitch Industry Standards Class I - Light Duty 2,000 lb (907 kg) Class II - Medium Duty 3,500 lb (1,587 kg) Class III - Heavy Duty 6,000 lb (2,721 kg) Class IV - Extra Heavy Duty 10,000 lb (4,535 kg) See chart on Ú page 71 for the Maximum Gross Trailer Weight (GTW) towable for your given drivetrain. All trailer hitches should be professionally installed on your vehicle.