78 MULTIMEDIA UCONNECT SETTINGS U CONNECT 3/3 NAV S ETTINGS Push the Settings button on the faceplate to display the menu setting screen. In this mode, the Uconnect system allows you to access programmable features that may be equipped. The Uconnect system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel. These buttons allow you to access and change the customer programmable features. Many features can vary by vehicle. NOTE: Only one category may be selected at a time. The Back Arrow will change into a Done button if any changes are made.
Buttons on the faceplate are located below and/or beside the Uconnect system in the center of the instrument panel. In addition, there is a Scroll/ Enter control knob located on the right side. Turn the control knob to scroll through menus and change settings. Push the center of the control knob one or more times to select or change a setting. When making a selection, press one button on the touchscreen to enter the desired menu. Once in the desired menu, press and release the preferred setting option until a check mark appears next to the setting, showing that setting has been selected.
Once the setting is complete, either press the Back Arrow button to return to the previous menu, or press the X button on the touchscreen to close out of the settings screen. Pressing the Up or Down Arrow button on the right side of the screen will allow you to toggle up or down through the available settings. Uconnect 3/3 NAV With 5-inch Display Buttons On The Touchscreen And Buttons On The Faceplate Your Uconnect system may also have Screen Off and Mute buttons on the faceplate. 1 — Uconnect Buttons On The Touchscreen 2 — Uconnect Buttons On The Faceplate Push the Screen Off button on the faceplate to turn off the Uconnect screen.
Push the button again or tap the screen to turn the screen on. Push the Back Arrow button to exit out of a menu or certain option on the Uconnect system. NOTE: The NAV button in the middle of your Uconnect System may also contain the word CAMERA.