GENERAL INFORMATION - Technical Data Section 000-0000 SM - 3303 Max Body Depth 1 450 (4-9) 3 220 ( 10-7 ) 3 020 (9-11) Vehicle Clearance Turning Diameter 19.5m (64ft) 3 720 (12-2) 6 500 (21-4) 5 700 (18-8) 5 370 (17-7) 3 670 (12-0) 3 100 (10-2) 3 450 (11-4) 2 240 (7-4) 560 (1-10) 675 (2-3) 1 810 (5-11) 2 540 (8-4) 1 600 (5-3) 3 000 (9-10) 1 540 (5-0) 1 970 (6-6) 2 640 (8-8) 10 650 (34-11) 3 430 (11-3) Fig. 1 - Machine Dimensions Dimensions in mm (ft-in) ENGINE Make/Model .................................... Detroit Diesel Series 60 Type .............. Four cycle diesel, turbocharged with air-to-air charge cooling, water cooled. Electronic management. Gross power at 2 200 rev/min ......
332 kW (445 hp, 451 PS) Net power at 2 200 rev/min .......... 291 kW (390 hp, 395 PS) TRANSMISSION Make/Model ..................................... ZF 6WG 310 Automatic with manual override. The transmission consists of a torque converter close-coupled to a 6 speed gearbox with integral output transfer gearing. Automatic shifting throughout the range, with kickdown feature. Lockup in all forward gears. A torque-proportioning output differential transmits drive permanently to front and rear axles. This differential may be locked by the driver for use in difficult traction conditions. Integral hydraulic retarder. Note: Net power is after deductions for alternator.
Engine emission meets Tier II USA EPA/CARB MOH 40 CFR 89 and EU NRMM (non-road mobile machinery) directive. Maximum Torque.............................. 2 000 Nm (1 475 lbf ft) at 1 350 rev/min Number of cylinders/configuration ............ 6 cylinder, in line Bore and Stroke .................... 130 x 160 mm (5.12 x 6.30 in) Total Displacement................................. 12.7 litres (774 inі) Air cleaner .................................... Dry type, double element Starting ..................................................................... Electric Maximum Speed (No load) ............................ 2 325 rev/min Maximum Speed (Full load) ...........................
2 200 rev/min Idle Speed ......................................................... 700 rev/min Maximum Operating Slope........................ 30° (57% Grade) Pressures: Main ....................................... 16 + 2 bar (232 + 30 lbf/inІ) Lockup (Wk) ........................ 14 + /- 1 bar (190 + /- 15 lbf/inІ) Converter 'IN' ........... 7.6 bar (110 lbf/inІ) at 2 300 rev/min Converter 'OUT' ..........4.8 bar (70 lbf/inІ) at 2 300 rev/min Converter Relief Valve ....................... 8.5 bar (123 lbf/inІ) Retarder ...................................................6 bar (87 lbf/inІ) Temperatures: Normal ...................................
80° - 110° C (176° - 230° F) Maximum .................................................. 120° C (248° F) Stall Speed ............................................. 1 835 ± 50 rev/min SM 2110 Rev 4 03-05 1 28˚ 52 (1- 5 9)