STRUCTURE AND FUNCTION SWING MOTOR SWING HOLDING BRAKE OPERATION 1) When swing brake solenoid valve is DEAC- TIVATED When the swing brake solenoid valve is DEAC- TIVATED the pressurized oil from the pressure reducing valve is shut off and port B is con- nected to the tank circuit. Because of this, brake piston (7) is pushed down in the direction of the arrow by brake spring (8), so disc (4) and plate (5) are pushed together and brake is applied. 2) When swing brake solenoid valve is EX- CITED When the swing brake solenoid valve is EX- CITED the valve is switched, and the pressu- rized oil from the pressure reducing valve en- ters port B and flows to brake chamber A .
The pressurized oil entering chamber A , over- comes the force of brake spring (8), and brake piston (7) is pushed up in the direction of the arrow. Because of this, disc (4) and plate (5) separate, and the brake is released. 10-100