STRUCTURE AND FUNCTION SWING MOTOR OPERATION OF THE REVERSE FLOW CHECK VALVE 1. Function When the swing is stopped, this valve reduced the rocking motion of the swing body due to the inertia of the swing body, backlash of the ma- chinery system, the compressibility of the hy- draulic oil, etc. This valve is effective to prevent the cargo from being spilled when the swing is stopped as well as to shorten the recycle time (excellent in the positioning accuracy and the next operation can be started quickly). 2.
Operation 1) While the braking pressure is present at the MB port The MB pressure is introduced to the d chamber via the notch and the spool (5) makes a stroke motion to the left, pressing the spring (6) due to the difference in area (D1>D2) and the interconnection of MB to e is established. On this occasion, the MA pressure is less than the set pressure of the spring (3), so that the spool (2) does not make a stroke motion and the pressure oil is closed by the spool (2), and the braking force is secured. 2) When the motor is stopped temporarily The motor is reversed by the shutoff pressure that occurred at the MB port (First reversal).
On this occasion, the reverse pressure is gen- erated at the MA port side. This pressure at the MA port is introduced to the a chamber, and the spool (2) makes a stroke motion to the right, pressing the spring (3), and the interconnection of MA to b is established. Also, the interconnec- tion of b to f is established through the drill hole and the reverse pressure at the MA port is by- passed to the T port, thereby preventing the second reversal. 10-102