Komatsu — TRAVEL SPEED, SWING BRAKE, 2- STAGE RELIEF SUSPENSION LOCK SOLENOID VALVE

STRUCTURE AND FUNCTION EPC, SOLENOID VALVE TRAVEL SPEED, SWING BRAKE, 2-STAGE RELIEF SUSPENSION LOCK SOLENOID VALVE 1. Nut 2. Plunger 3. Coil 4. Connector 5. Push pin 6. Spring 7. Spool 8. Block Operation When solenoid is deactivated The signal current does not flow from the con- troller, so coil (3) is deactivated. For this reason, spool (7) is pushed to the left in the direction of the arrow by spring (6). As a result, port A closes, the pressurized oil from the pressure reducing valve does not flow to the actuator. At the same time, the pressurized oil from the actuator flows from port B to port C, and is then drained to the tank.

When solenoid is excited When the signal current flows from the control- ler to coil (3), coil (3) is excited, and a propul- sion force is generated in plunger (2) to the right in the direction of the arrow. For this reason, spool (7) is pushed to the right in the direction of the arrow by push pin (5). As a result, the pressurized oil from the pres- sure reducing valve flows from port A to port B, and then flows to the actuator. At the same time, port C is closed, and this stops the oil from flowing to the tank. 10-121