Komatsu — ENGINE CONTROL SYSTEM

STRUCTURE AND FUNCTION ENGINE CONTROL SYSTEM 2) GOVERNOR MOTOR 1. Potentiometer 2 Cover 3. Shaft 4. Dust seal 5. Bearing 6. Motor 7. Gear 8. Connector FUNCTION The motor is rotated and the governor lever of the fuel injection pump is controlled by the drive signal from the engine throttle controller. A stepping motor is used for the motor which provides the motive power. In addition, a potentiometer for giving feedback is installed to allow observation of the operation of the motor. The rotation of the motor is transmitted to the potentiometer through a gear. OPERATION Motor stationary Both A phase and B phase of the motor are continuous, and a holding torque is generated in the motor.

Motor rotating A pulse current is applied to the A phase and B phase from the engine throttle controller to give synchronous rotation with the pulse. 10-134