Komatsu — ENGINE CONTROL SYSTEM

STRUCTURE AND FUNCTION ELECTRONIC CONTROL SYSTEM FUNCTION This function provides an increase in the dig- ging power for a certain time or switches the working mode to the lifting operation (L/O) and reduced the speed. It is operated using the L.H. knob switch to momentarily match the operat- ing conditions. # The power max. function and swift slowdown function are operated with the same switch. Only one of these functions can be selected at any time; they cannot both be operated to- gether. 1) Power max. function During digging operations, when that extra bit of digging power is needed (for exam- ple, when digging up boulders), the L.H.

knob switch can be pressed to raise the hy- draulic pressure by approx. 10% and in- crease the digging force. If the L.H. knob switch is pressed ON when the working mode is at H/O or G/O, each function is automatically set as follows. 10-147 Working mode Cut-off function 2-stage relief function Actuating time Heavy-duty working operation (H/O work) Cancelled Actuated 31.8534.79 MPa (325355 kg/cm2) Automatically cancelled after 8.5 sec. nctio tions, or fin ing m /O) m ch is p /O or follow Working mode Actuating time Lifting operation L/O While switch is kept pressed