Komatsu — ENGINE CONTROL SYSTEM

STRUCTURE AND FUNCTION ELECTRONIC CONTROL SYSTEM FUNCTION If all the control levers are at neutral when wait- ing for work or waiting for a dump truck, the en- gine speed is automatically reduced to a midrange speed to reduce fuel consumption and noise. If any lever is operated, the engine speed re- turns immediately to the set speed. OPERATION Control levers at neutral If the engine is running at above the decelera- tion actuation speed (approx. 1400 rpm), and all the control levers are returned to neutral, the engine speed drops immediately to approx. 100 rpm below the set speed to the No. 1 decelera- tion position. If another 4 seconds passes, the engine speed is reduced to the No.

2 deceleration position (approx. 1400 rpm), and is kept at that speed until a lever is operated. When control lever is operated If any control lever is operated when the engine speed is at No. 2 deceleration, the engine speed will immediately rise to the speed set by the fuel control dial. 10-149