Komatsu — DISPLAY MONITOR

STRUCTURE AND FUNCTION MACHINE MONITOR SYSTEM DISPLAY MONITOR 1. Clock (displays error code when error occurs) 2. Service meter 3. Coolant temperature gauge 4. Fuel gauge 5. Engine oil level caution lamp 6. Preheating pilot lamp 7. Swing holding brake pilot lamp 8. Charge level caution lamp 9. Air cleaner clogging caution lamp 10. Overload caution lamp 11. Coolant level caution lamp 12. Engine oil pressure caution lamp 13. Fuel level caution lamp 14. Coolant temperature caution lamp 15.

Oil maintenance caution lamp Contents of display 10-162 Symbol Display item Display range When engine is stopped When engine is running Coolant level Below low level Flashes when abnormal Flashes and buzzer sounds when abnormal Engine oil pressure Below 1,500 rpm: below 0.05 MPa (0.5 kg/cm2) Above 1,500 rpm:

below 0.15 MPa (1.5 kg/cm2) Lights up when normal (goes out when engine starts) Flashes and buzzer sounds when abnormal Air cleaner clogging When clogged OFF Flashes when abnormal Charge level When charging is defective Lights up when normal (goes out when engine starts) Flashes when abnormal Engine oil level Below low level Flashes when abnormal OFF Over load Above high level OFF Flashes when abnormal Parking When swing is locked Lights up when swing lock switch is ON, flashes when swing lock prolix switch is ON Preheating During preheating Lights up for 30 seconds when starting switch is at HEAT, then flashes for 10 seconds to indicate that preheating is completed Coolant temperature Flashes when above 102°C, flashes and buzzer sounds when above 105°C Fuel level Flashes when below low level Oil mainte- nance