Komatsu — OVERLOAD WARNING DEVICE

STRUCTURE AND FUNCTION OVERLOAD WARNING DIVICE OVERLOAD WARNING DEVICE 1) OUTLINE Function This device is installed to prevent the machine from tipping over when it lifts an excessive weight while being used as a crane. Structure When an excessive weight is lifted, the oil pres- sure goes up at the bottom side of the boom cylinders. When this happens, the pressure switch senses the rising pressure, turns the pressure switch on, and lights the monitor lamp to warn the operator. When the monitor lamp lights, immediately lower the weight to the ground or bring the arm closer in the operator to prevent the machine from tipping over.

Note The overload caution system can only be activated when the L/O mode (lifting) is acti- vated on the monitor panel. 10-167