TESTING AND ADJUSTING 20 TESTING AND ADJUSTING Table of judgement standard value ........... 20-2 Standard value table for electrical parts .... 20-12 Checking and adjusting belt tension for air conditioner compressor................... 20-22 Adjusting engine speed sensor ................. 20-23 Testing and adjusting governor motor lever ................................................ 20-24 Testing clearance of swing circle bearing.. 20-25 Testing and adjusting hydraulic pressure in work equipment , swing, travel circuit ...............................................
20-26 Testing and adjusting PC valve output pressure (servo piston input pressure) .......................................... 20-29 Testing and adjusting LS valve output pressure (servo piston input pressure) and LS differential ..................... 20-31 Testing and adjusting PPC pressure ......... 20-33 Testing EPC valve, solenoid valve output pressure ................................ 20-34 Measuring PPC valve output pressure...... 20-35 Testing and adjusting travel motor relief pressure ................................. 20-36 Measuring rotation speed of propshaft...... 20-37 Testing and adjusting transmission clutch control circuit...................................
20-38 Testing locations causing hydraulic drift of work equipment .............. 20-43 Measuring oil leakage ............................... 20-45 Releasing remaining pressure in hydraulic circuit ......................................... 20-46 Bleeding air ............................................... 20-47 Accumulators ............................................ 20-49 Troubleshooting ........................................ 20-53 When carrying out testing, adjusting, or troubleshooting, park the machine on level ground and use the safety pins and blocks to prevent the machine from moving.
When carrying out work together with other workers, always use signals and do not let unauthorized people near the machine. When checking the water level, always wait for the water to cool down. If the radiator cap is removed when the water is still hot, the water will spurt out and cause burns. Be careful not to get caught in the fan, fan belt, or other rotating parts. 20-1