TESTING AND ADJUSTING TESTING AND ADJUSTING GOVERNOR MOTOR LEVER STROKE TESTING AND ADJUSTING GOVERNOR MOTOR LEVER STROKE TESTING 1. Check engine speed at high idle in HO work mode 2. Check engine speed in HO travel mode (lightly depress travel pedal until engine speed vises without machine moving) and at LOW idle. ADJUSTING Set engine speed at high idle in HO work mode to the standard value. 1. Loosen lock nut from linkage . Engine speed will be changed by turning linkage into or out of joint so that linkage length is changed. 2. Adjust length of linkage and confirm engine speed. 3. Tighten lock nut when correct adjustment is achieved. 4.
Confirm engine speeds are within tolerance according to: No load engine speed 20-24 Condition Fuel dial Engine speed Low idle MIN. 900 ± 75 Auto decel MAX 1400± 100 L.O. MAX 1600 ± 100 G.O., F.O. MAX 1950 ± 100 H.O. work MAX 2100 ± 100 H.O. travel MAX 2450 ± 100