Komatsu — CHECKS BEFORE TROUBLESHOOTING

TROUBLESHOOTING CHECKS BEFORE TROUBLESHOOTING CHECKS BEFORE TROUBLESHOOTING 20-64 Item Judgement standard Remedy Lubricating oil, coolant 1. Check fuel level, type of fuel 2. Check for impurities in fuel 3. Check hydraulic oil level 4. Check hydraulic strainer 5. Check swing machinery oil level 6. Check engine oil level (oil pan oil level), type of oil 7. Check coolant 8. Check dust indicator for clogging 9. Check hydraulic filter - - - - - - - - - Add fuel Clean, drain Add oil Clean, drain Add oil Add oil Add water Clean or replace Replace Electrical equipment 1. Check for looseness, corrosion of battery terminal, wiring 2. Check for looseness, corrosion of alternator terminal, wiring 3.

Check for looseness, corrosion of starting motor terminal, wiring - - - Tighten or replace Tighten or replace Tighten or replace Hydraulic mechanical equipment 1. Check for abnormal noise, smell 2. Check for oil leakage 3. Carry out air bleeding - - - Repair Repair Bleed air Electrics, electrical equipment 1. Check battery voltage (engine stopped) 2. Check battery electrolyte level 3. Check for discolored, burnt, exposed wiring 4. Check for missing wiring clamps, hanging wiring 5. Check for water leaking on wiring (be particularly careful attention to water leaking on connectors or terminals) 6. Check for blown, corroded fuses 7.

Check alternator voltage (engine running at 1/2 throttle or above) 8. Check operating sound of battery (when switch is turned ON/OF) 20 - 30 V - - - - - [After running for several minutes: 27.5 - 29.5 V] - Replace Add or replace Replace Repair Disconnect connector and dry Replace Replace Replace