Komatsu — DISPLAY METHOD AND SPECIAL FUNCTIONS OF MONITOR PANEL

TROUBLESHOOTING TESTING AND ADJUSTING DISPLAY METHOD AND SPECIAL FUNCTIONS OF MONITOR PANEL 4. Governor motor adjustment mode This is used when adjusting the linkage between the governor motor and the injection pump. (For details of the procedures, see TESTING AND ADJUSTING.) 5. Time adjustment mode To adjust the time, do as follows. 6. Telephone number input To input telephone numbers, do as follows. 20-91 Operation Display 1. To set to the governor motor adjustment mode, keep the time switch + R.H. travel speed switch + R.H. working mode switch pressed for 2.5 seconds. 2. To return to the time display mode use the same procedure as in Step 1. 1. 2.

Buzzer sounds once a second Operation Display 1. To set to the time adjustment mode, keep the time switch pressed for 2.5 seconds. 2. Use the L.H. working mode switch to advance the hour. 3. Use the R.H. working mode switch to advance the minute 4. To return to the time display mode use the same procedure as in Step 1. 1. The time mark portion flashes The example shows the situation when setting to 12:34. Operation Display 1. To set to the telephone number input mode, keep the time switch + auto- deceleration switch pressed for 2.5 seconds. 2. When the time switch + L.H. working mode switch are pressed, the display moves 2 digits at a time to the left, and when the R.H.

working mode switch is pressed, the display moves 2 digits at a time to the right. The 2 digits at the new location flash. 1. The time mark portion flashes