Komatsu — METHOD OF USING TROUBLESHOOTING CHARTS

TROUBLESHOOTING METHOD OF USING TROUBLESHOOTING CHARTS The basic method of using the troubleshooting chart is as follows. Items listed for [Questions] and [Check items] that have a relationship with the Cause items are marked with o, and of these, causes that have high probability are marked with O. Check each of the [Questions] and [Check items] in turn, and mark the o or O in the chart for items where the prob- lem appeared. The vertical column (Causes) that has the highest number of points is the most probable cause, so start troubleshooting for that item to make final confirma- tion of the cause. 1.

For [Confirm recent repair history] in the [Questions] section, ask the user, and mark the Cause column with ^ to use as reference for locating the cause of the failure. However, do not use this when making calculations to narrow down the causes. 2. Use the in the Cause columns as refer- ence for [degree of use (Operated for long period)] in the [Questions] section as refer- ence. As a rule, do not use it when calculating the points for locating the cause, but it can be included if necessary to determine the order for troubleshooting. 20-138