Komatsu — H- 8 Arm is slow or lacks power.

TESTING AND ADJUSTING H-8 H-8 Arm is slow or lacks power. # When travel and swing speeds are normal. # Carry out troubleshooting in the heavy- duty operation mode. 6 YES YES Does LS shuttle valve move smoothly? 5 YES Is pump relief pressure normal when arm circuit is relieved? Check LS shuttle for arm and bucket. NO Is pressure compen- sation valve normal, or does pressure compensation piston move smoothly? It is also possible to interchange with other compensation valve. Note: After inspection, do not forget to return to the original position. 4 31.9 ± 2.5 MPa (325 ± 25 kg/cm 2 ) Engine at high idling. YES NO 3 YES NO Does control valve spool move smoothly?

2 YES Is output pressure of PPC valve normal? NO Is pressure switch for arm IN, OUT normal? 1 3.6 ± 0.3 MPa (36.7 ± 3 kg/cm 2 ) Engine at high idling. Lever operated fully. NO See Judgement Table Note: If auto- deceleration is cancelled when arm IN or arm OUT is operated, system is normal. (When valve controller related parts are normal). NO 20-218