Komatsu — TIGHTENING TORQUES

DISASSEMBLY AND ASSEMBLY TRANSMISSION FLANGE POSITIONING The motion output flange for forward axle (1) must be mounted by using some adjustment thickness (2) be- tween washer (3) and shaft (4) in order to assure a right assembly. Detect with a gauge the dimension (S) of the thickness to use. Insert the previously defined thickness and clamp the screw (5) with 139 Nm torque.

TIGHTENING TORQUES (Refer to page 53) 30-39 Thread Nm 1 Screw-forktoshaft 2 Screw-outputflanges 3 Brakereleasenut-screw 4 Frontcover-screw 5 Rearcover-screw 6 Forkcontrolscrew-lever 7 Half-housingfasteningscrew 8 Breather 9 Oildrain,fillingandlevelplug - M12x25 M10x20 M10x90 M10x30 M10x20 M10x65 M10 M22 32 139 50 50 50 50 50 10 60