Komatsu — PUMP & CLUTCH ASSEMBLY

DISASSEMBLY AND ASSEMBLY TRANSMISSION PUMP & CLUTCH ASSEMBLY Once the clutch housing has been removed from the transmission: replace O-ring (*) loosen bolts (2) to remove cover (4) loosen and remove bolts (2) to disconnect pump (1) remove gear (9) from pump's shaft and inspect for wear and damage. Replace as necessary. when reassembling, tighten bolts (6) to a torque of 21,5 daN x m and bolts (2) to a torque of 1 daN x m. WARNING : do not try to tear down and repair the unit (8). Such component must be serviced by specialized staff only! 30-41