Komatsu — AXLE BEAM

DISASSEMBLY AND ASSEMBLY FRONT AXLE AXLE BEAM Check the condition of the oil breather (1), clean and replace as necessary. Check the condition of the bushes (2) on the center pivot for wear or damage; replace, if necessary. Inspect the drive shaft bushing (3) for wear and dam- ages; replace, if necessary. Replace the oil seal (4). It is suggested to replace oil seal (5) on pinion cover and O-ring (6) between axle housing and differential support. Apply Loctite 510 between axle housing and differen- tial end plate. 30-56