DISASSEMBLY AND ASSEMBLY HYDRAULIC CYLINDER DISASSEMBLY OF HYDRAULIC CYLINDER ASSEMBLY (THREADED PISTON TYPE) 1. Piston rod assembly 1) Remove piping from cylinder assembly. 2) Remove mounting bolts and disconnect head as- sembly (1). 3) Pull out piston rod assembly (2). # Place a container under the cylinder to catch the oil. 4) Disassemble piston rod assembly as follows: i) Set piston rod assembly (2) in tool H1 . ii) Remove piston assembly stopper screw (3). # Screw size (common for all of boom, arm, and bucket cylinders) : M12 x Pitch 1.75 (boom, arm) : M10 x Pitch 1.5 (bucket).
# If screw (3) is caulked strongly and cannot be removed, screw it in fully and make a tap in the screw to remove it. 30-105